Skip to content
Search by vehicle Dealer Portal
Search by vehicle
Home / Fitment Guide

THE DETAILS BEHIND THE DESIGN

Understand your wheel specifications.

Use this guide to read the catalogue, then confirm the complete fitment with a qualified wheel specialist.

Diameter & width

A size such as 20 × 8.5 describes the wheel’s diameter and width in inches. Both affect the tyre options and clearance required.

Bolt pattern / PCD

A pattern such as 5×114.3 describes five mounting holes on a 114.3 mm pitch circle. The wheel and vehicle mounting pattern must be compatible.

Offset

Offset is the distance in millimetres between the wheel centreline and its mounting surface. It affects how the wheel sits relative to the suspension and bodywork.

Centre bore

The centre bore is the opening at the centre of the wheel, measured in millimetres. Your installer can confirm the correct hub fit and any suitable centring components.

Load rating

The catalogue shows the load rating per wheel where it is confirmed. The rating must suit the vehicle and its intended use; a missing value needs confirmation.

Part number

Each specification row has its own part number. Include this code when asking about fitment or availability so the team can identify the exact option.

Matching the bolt pattern is only the start.

Brake clearance, suspension clearance, body clearance, tyres, mounting hardware and vehicle modifications also matter. Share your vehicle’s year, make, model and modifications with your installer before ordering.

Ask for fitment advice →

LET’S FIND YOUR NEXT SET

Good advice. The right fit.

Tell us your vehicle and the wheels you have in mind.

Talk to NYC Wheels →
preloader